Congratulations on having your GhostMove device! We hope you will like this tiny piece of magic, and you'll amaze your audience.
You should push the CR2032 battery you got into the battery slot (larger hole on the side, the + side of the battery should be at the bottom), and GhostMove will turn on (see the photo below). The device has no on/off switch, but turns off when no application is connected to it. You can wake it up with a tap, or by pressing the button, and it will start blinking for 15 seconds. During this time it is ready for a connection, then turns off.
When you finished using it, just disconnect and it will start sleeping. You can also remove the battery using a pencil for a longer battery time, but it drains minimal battery when the device is off.
You should install the GhostMove application. Go to The App page and follow the instructions.
Start the app, and go to Settings. You will see different sections. Under "DEVICES" near "Connect GhostMove" tap the "List devices" button. Your GhostMove device should be listed there (GhostMove should be ON and blinking). Tap on the device name, and the device should connect. The LED on the GhostMove device will stop blinking.
On Android, make sure that GPS/Locations is turned on, and the app has the Location permission (while using the app). The app won't use your location, but this is mandatory for Bluetooth. Also, you may need to restart your phone.
Every phone has a Bluetooth connection limit. You should be able to connect at least 6 devices to your phone, and some phone has a higher limit (for example on iPhone X, we were able to connect 13 devices). To be able to work with GhostMove, make sure you have not already connected to the maximum number of devices.
In the app please go to "Settings" - "USER SETTINGS", and tap the text "click here to sign in" near "Account".
A new page will pop up, where you'll have to tap the button that says "Sign in with Apple" (iOS) or "Select Google account" (Android). On iOS you can hide your real email from the app, it won't matter. When you're logged in, your Account ID will be displayed on the Settings screen near "Account".
Tap your Account ID, and you'll see an input field where you can enter your activation code. You can also paste the code from the clipboard by tapping the document icon below the field. After inserting the code, tap the green checkmark and your code will be validated.
If everything is OK, the FULL version will be activated for your account, and you can use it on any iOS device where you log in with the same account.
